PV Solar Three Phase High Frequency Reactor

PV Solar Three Phase High Frequency Reactor
PV solar application flow (for two-level PV inverter 100kVA-1250kVA) Shinenergy PV solar reactors work on the AC output side of LC or LCL filter with transformer to the electrical consumer. In order to limit the short circuit current of transmission line and protect power equipment, reactor must...
Product Details

PV solar application flow (for two-level PV inverter 100kVA-1250kVA)

图片3.jpg

Shinenergy PV solar reactors work on the AC output side of LC or LCL filter with transformer to the electrical consumer. In order to limit the short circuit current of transmission line and protect power equipment, reactor must be installed. The reactor can reduce short circuit current and keep the voltage of the system momentarily unchanged.

In recent years, in the power system, in order to eliminate the fault capacitor caused by harmonic voltage and current in capacitor circuit, the method of series reactor by changing the system parameters has achieved remarkable results.

PV solar reactors, essentially protect the voltage output stable when load is in the low level. It is an efficient way to reduce over voltage damage to load. The protection of load insulation from premature aging and destruction results in a significantly increased performance of all PV solar systems.


图片1.jpgCAPABILITIES
Phases: 3
Current range: up to 800A
One minute voltage withstand: 3kA
Voltage range: up to 480V
Fundamental frequency: 50/60Hz
Switching frequency: up to 20kHz
Insulation classes: 180
Protection class: Optional
Cooling methods: AN, AF

Feedback